DPF-Dust removal device_Ecosail Energy Technology Jiangsu Co., LTD

Technology is introduced：

Carrier DPF device adopts ceramic filters as main components, the diesel engine particles in the filter efficiency is above 90%, ceramic filter, is made with two ends and outer surface and separated form has multiple next door from one end has been purified fluid through to the other end of the mainstream of the road on the surface of the porous plasmids and configuration on the inner wall of the mainstream way of membranes. Through a transverse lateral opening into the mainstream way, be purged of fluid through porous membranes and plastid inside to purification, and as a cleaning fluid was removed from the outer surface of porous plasmids, or through the outer surface of porous plastid inflow, purified of fluid through porous plastid inside for purification and filtration membrane, and as a cleaning fluid from the mainstream of at least one end of the road side openings is removed.

Technical advantages：

DPF can adopt multiple regeneration methods, and passive regeneration can bring convenience to customers

Soot can be burned to produce oxide and soot by adding an organic compound of iron or cerium to the fuel

Limit soot initiation and combustion temperature by close contact and catalysis.

.FBC must use wall flow DPF carrier and combine with active regeneration;

.FBC will increase the ash content to a certain extent;

. Additional filling tanks will need to be placed.

Using catalyst coating on DPF to reduce the ignition temperature of particles;

Can reduce the amount of oil injection and the frequency of oil injection;

The coating process has an effect on the catalyst capture efficiency and capture mode;

. The coating has low contact with particles.

DPF-Dust removal device

Message

Content：

Name：

Phone：